diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index a835704951629f2d741cc222ea479a362244ce06..c46c755f6e714a496b8a281671632e2bf7850117 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -241,86 +241,11 @@ GLOBAL(entry_SYSCALL_64_after_hwframe)
 
 	TRACE_IRQS_OFF
 
-	/*
-	 * If we need to do entry work or if we guess we'll need to do
-	 * exit work, go straight to the slow path.
-	 */
-	movq	PER_CPU_VAR(current_task), %r11
-	testl	$_TIF_WORK_SYSCALL_ENTRY|_TIF_ALLWORK_MASK, TASK_TI_flags(%r11)
-	jnz	entry_SYSCALL64_slow_path
-
-entry_SYSCALL_64_fastpath:
-	/*
-	 * Easy case: enable interrupts and issue the syscall.  If the syscall
-	 * needs pt_regs, we'll call a stub that disables interrupts again
-	 * and jumps to the slow path.
-	 */
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-#if __SYSCALL_MASK == ~0
-	cmpq	$__NR_syscall_max, %rax
-#else
-	andl	$__SYSCALL_MASK, %eax
-	cmpl	$__NR_syscall_max, %eax
-#endif
-	ja	1f				/* return -ENOSYS (already in pt_regs->ax) */
-	movq	%r10, %rcx
-
-	/*
-	 * This call instruction is handled specially in stub_ptregs_64.
-	 * It might end up jumping to the slow path.  If it jumps, RAX
-	 * and all argument registers are clobbered.
-	 */
-#ifdef CONFIG_RETPOLINE
-	movq	sys_call_table(, %rax, 8), %rax
-	call	__x86_indirect_thunk_rax
-#else
-	call	*sys_call_table(, %rax, 8)
-#endif
-.Lentry_SYSCALL_64_after_fastpath_call:
-
-	movq	%rax, RAX(%rsp)
-1:
-
-	/*
-	 * If we get here, then we know that pt_regs is clean for SYSRET64.
-	 * If we see that no exit work is required (which we are required
-	 * to check with IRQs off), then we can go straight to SYSRET64.
-	 */
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_OFF
-	movq	PER_CPU_VAR(current_task), %r11
-	testl	$_TIF_ALLWORK_MASK, TASK_TI_flags(%r11)
-	jnz	1f
-
-	LOCKDEP_SYS_EXIT
-	TRACE_IRQS_ON		/* user mode is traced as IRQs on */
-	movq	RIP(%rsp), %rcx
-	movq	EFLAGS(%rsp), %r11
-	addq	$6*8, %rsp	/* skip extra regs -- they were preserved */
-	UNWIND_HINT_EMPTY
-	jmp	.Lpop_c_regs_except_rcx_r11_and_sysret
-
-1:
-	/*
-	 * The fast path looked good when we started, but something changed
-	 * along the way and we need to switch to the slow path.  Calling
-	 * raise(3) will trigger this, for example.  IRQs are off.
-	 */
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_ANY)
-	SAVE_EXTRA_REGS
-	movq	%rsp, %rdi
-	call	syscall_return_slowpath	/* returns with IRQs disabled */
-	jmp	return_from_SYSCALL_64
-
-entry_SYSCALL64_slow_path:
 	/* IRQs are off. */
 	SAVE_EXTRA_REGS
 	movq	%rsp, %rdi
 	call	do_syscall_64		/* returns with IRQs disabled */
 
-return_from_SYSCALL_64:
 	TRACE_IRQS_IRETQ		/* we're about to change IF */
 
 	/*
@@ -393,7 +318,6 @@ syscall_return_via_sysret:
 	/* rcx and r11 are already restored (see code above) */
 	UNWIND_HINT_EMPTY
 	POP_EXTRA_REGS
-.Lpop_c_regs_except_rcx_r11_and_sysret:
 	popq	%rsi	/* skip r11 */
 	popq	%r10
 	popq	%r9
@@ -424,47 +348,6 @@ syscall_return_via_sysret:
 	USERGS_SYSRET64
 END(entry_SYSCALL_64)
 
-ENTRY(stub_ptregs_64)
-	/*
-	 * Syscalls marked as needing ptregs land here.
-	 * If we are on the fast path, we need to save the extra regs,
-	 * which we achieve by trying again on the slow path.  If we are on
-	 * the slow path, the extra regs are already saved.
-	 *
-	 * RAX stores a pointer to the C function implementing the syscall.
-	 * IRQs are on.
-	 */
-	cmpq	$.Lentry_SYSCALL_64_after_fastpath_call, (%rsp)
-	jne	1f
-
-	/*
-	 * Called from fast path -- disable IRQs again, pop return address
-	 * and jump to slow path
-	 */
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_OFF
-	popq	%rax
-	UNWIND_HINT_REGS extra=0
-	jmp	entry_SYSCALL64_slow_path
-
-1:
-	JMP_NOSPEC %rax				/* Called from C */
-END(stub_ptregs_64)
-
-.macro ptregs_stub func
-ENTRY(ptregs_\func)
-	UNWIND_HINT_FUNC
-	leaq	\func(%rip), %rax
-	jmp	stub_ptregs_64
-END(ptregs_\func)
-.endm
-
-/* Instantiate ptregs_stub for each ptregs-using syscall */
-#define __SYSCALL_64_QUAL_(sym)
-#define __SYSCALL_64_QUAL_ptregs(sym) ptregs_stub sym
-#define __SYSCALL_64(nr, sym, qual) __SYSCALL_64_QUAL_##qual(sym)
-#include <asm/syscalls_64.h>
-
 /*
  * %rdi: prev task
  * %rsi: next task
diff --git a/arch/x86/entry/syscall_64.c b/arch/x86/entry/syscall_64.c
index 9c09775e589d67ab574b6412b02a1899f26a4a0d..c176d2fab1da98274a098f6ffb2a8e349208572a 100644
--- a/arch/x86/entry/syscall_64.c
+++ b/arch/x86/entry/syscall_64.c
@@ -7,14 +7,11 @@
 #include <asm/asm-offsets.h>
 #include <asm/syscall.h>
 
-#define __SYSCALL_64_QUAL_(sym) sym
-#define __SYSCALL_64_QUAL_ptregs(sym) ptregs_##sym
-
-#define __SYSCALL_64(nr, sym, qual) extern asmlinkage long __SYSCALL_64_QUAL_##qual(sym)(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
+#define __SYSCALL_64(nr, sym, qual) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
 #include <asm/syscalls_64.h>
 #undef __SYSCALL_64
 
-#define __SYSCALL_64(nr, sym, qual) [nr] = __SYSCALL_64_QUAL_##qual(sym),
+#define __SYSCALL_64(nr, sym, qual) [nr] = sym,
 
 extern long sys_ni_syscall(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);