diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 3ce880729cff838e15ded4a29c88e67abccf79b5..38b0da300dd547744a54eca9fe8a21c04177998b 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -20,10 +20,13 @@
 #include <linux/mm.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/amba/mmci.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 #include <linux/platform_data/clk-integrator.h>
 #include <linux/slab.h>
 #include <linux/irqchip/arm-vic.h>
+#include <linux/gpio/machine.h>
 
 #include <asm/sizes.h>
 #include "lm.h"
@@ -51,6 +54,13 @@ void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
 
 EXPORT_SYMBOL(impd1_tweak_control);
 
+/*
+ * MMC support
+ */
+static struct mmci_platform_data mmc_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
 /*
  * CLCD support
  */
@@ -291,6 +301,7 @@ static struct impd1_device impd1_devs[] = {
 		.offset	= 0x00700000,
 		.irq	= { 7, 8 },
 		.id	= 0x00041181,
+		.platform_data = &mmc_data,
 	}, {
 		.offset	= 0x00800000,
 		.irq	= { 9 },
@@ -372,6 +383,43 @@ static int __init_refok impd1_probe(struct lm_device *dev)
 
 		pc_base = dev->resource.start + idev->offset;
 		snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
+
+		/* Add GPIO descriptor lookup table for the PL061 block */
+		if (idev->offset == 0x00400000) {
+			struct gpiod_lookup_table *lookup;
+			char *chipname;
+			char *mmciname;
+
+			lookup = devm_kzalloc(&dev->dev,
+					      sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup),
+					      GFP_KERNEL);
+			chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL);
+			mmciname = kasprintf(GFP_KERNEL, "lm%x:00700", dev->id);
+			lookup->dev_id = mmciname;
+			/*
+			 * Offsets on GPIO block 1:
+			 * 3 = MMC WP (write protect)
+			 * 4 = MMC CD (card detect)
+			 *
+			 * Offsets on GPIO block 2:
+			 * 0 = Up key
+			 * 1 = Down key
+			 * 2 = Left key
+			 * 3 = Right key
+			 * 4 = Key lower left
+			 * 5 = Key lower right
+			 */
+			/* We need the two MMCI GPIO entries */
+			lookup->table[0].chip_label = chipname;
+			lookup->table[0].chip_hwnum = 3;
+			lookup->table[0].con_id = "wp";
+			lookup->table[1].chip_label = chipname;
+			lookup->table[1].chip_hwnum = 4;
+			lookup->table[1].con_id = "cd";
+			lookup->table[1].flags = GPIO_ACTIVE_LOW;
+			gpiod_add_lookup_table(lookup);
+		}
+
 		d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K,
 					    irq1, irq2,
 					    idev->platform_data, idev->id,