- Sep 22, 2020
-
-
Peter Zijlstra authoredstable inclusion from linux-4.19.129 commit 373491f1f41896241864b527b584856d8a510946 -------------------------------- [ Upstream commit bf2c59fc ] In the CPU-offline process, it calls mmdrop() after idle entry and the subsequent call to cpuhp_report_idle_dead(). Once execution passes the call to rcu_report_dead(), RCU is ignoring the CPU, which results in lockdep complaining when mmdrop() uses RCU from either memcg or debugobjects below. Fix it by cleaning up the active_mm state from BP instead. Every arch which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit() from AP. The only exception is parisc because it switches them to &init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()), but the patch will still work there because it calls mmgrab(&init_mm) in smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu(). WARNING: suspicious RCU usage ----------------------------- kernel/workqueue.c:710 RCU or wq_pool_mutex should be held! other info that might help us debug this: RCU used illegally from offline CPU! Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 get_work_pool+0x110/0x150 __queue_work+0x1bc/0xca0 queue_work_on+0x114/0x120 css_release+0x9c/0xc0 percpu_ref_put_many+0x204/0x230 free_pcp_prepare+0x264/0x570 free_unref_page+0x38/0xf0 __mmdrop+0x21c/0x2c0 idle_task_exit+0x170/0x1b0 pnv_smp_cpu_kill_self+0x38/0x2e0 cpu_die+0x48/0x64 arch_cpu_idle_dead+0x30/0x50 do_idle+0x2f4/0x470 cpu_startup_entry+0x38/0x40 start_secondary+0x7a8/0xa80 start_secondary_resume+0x10/0x14 Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Paul Moore authored
stable inclusion from linux-4.19.129 commit 4fe5dcafc74d9729e5f11f2d418c394eadbe0035 -------------------------------- [ Upstream commit 3054d067 ] If audit_list_rules_send() fails when trying to create a new thread to send the rules it also fails to cleanup properly, leaking a reference to a net structure. This patch fixes the error patch and renames audit_send_list() to audit_send_list_thread() to better match its cousin, audit_send_reply_thread(). Reported-by:
<teroincn@gmail.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Paul Moore authored
stable inclusion from linux-4.19.129 commit 6d2f2b4218ad6af229ccefb517193094b88939ca -------------------------------- [ Upstream commit a48b284b ] If audit_send_reply() fails when trying to create a new thread to send the reply it also fails to cleanup properly, leaking a reference to a net structure. This patch fixes the error path and makes a handful of other cleanups that came up while fixing the code. Reported-by:
<teroincn@gmail.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Serge Semin authored
stable inclusion from linux-4.19.129 commit 4d4d112dab0f7ba2b374264ec29c3d9405369fe5 -------------------------------- [ Upstream commit 46164fde ] Tx-only DMA transfers are working perfectly fine since in this case the code just ignores the Rx FIFO overflow interrupts. But it turns out the SPI Rx-only transfers are broken since nothing pushing any data to the shift registers, so the Rx FIFO is left empty and the SPI core subsystems just returns a timeout error. Since DW DMAC driver doesn't support something like cyclic write operations of a single byte to a device register, the only way to support the Rx-only SPI transfers is to fake it by using a dummy Tx-buffer. This is what we intend to fix in this commit by setting the SPI_CONTROLLER_MUST_TX flag for DMA-capable platform. Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200529131205.31838-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Serge Semin authored
stable inclusion from linux-4.19.129 commit 655800d9203e59ae1fcd88882cb1887665d3f75f -------------------------------- [ Upstream commit 43dba9f3 ] It's pointless to track the Tx overrun interrupts if Rx-only SPI transfer is issued. Similarly there is no need in handling the Rx overrun/underrun interrupts if Tx-only SPI transfer is executed. So lets unmask the interrupts only if corresponding SPI transactions are implied. Co-developed-by:
Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Luke Nelson authored
stable inclusion from linux-4.19.129 commit 6d94929ed5df09303b2658b5a311db5e1a93316b -------------------------------- [ Upstream commit 579d1b3f ] This patch fixes two issues present in the current function for encoding arm64 logical immediates when using the 32-bit variants of instructions. First, the code does not correctly reject an all-ones 32-bit immediate, and returns an undefined instruction encoding. Second, the code incorrectly rejects some 32-bit immediates that are actually encodable as logical immediates. The root cause is that the code uses a default mask of 64-bit all-ones, even for 32-bit immediates. This causes an issue later on when the default mask is used to fill the top bits of the immediate with ones, shown here: /* * Pattern: 0..01..10..01..1 * * Fill the unused top bits with ones, and check if * the result is a valid immediate (all ones with a * contiguous ranges of zeroes). */ imm |= ~mask; if (!range_of_ones(~imm)) return AARCH64_BREAK_FAULT; To see the problem, consider an immediate of the form 0..01..10..01..1, where the upper 32 bits are zero, such as 0x80000001. The code checks if ~(imm | ~mask) contains a range of ones: the incorrect mask yields 1..10..01..10..0, which fails the check; the correct mask yields 0..01..10..0, which succeeds. The fix for both issues is to generate a correct mask based on the instruction immediate size, and use the mask to check for all-ones, all-zeroes, and values wider than the mask. Currently, arch/arm64/kvm/va_layout.c is the only user of this function, which uses 64-bit immediates and therefore won't trigger these bugs. We tested the new code against llvm-mc with all 1,302 encodable 32-bit logical immediates and all 5,334 encodable 64-bit logical immediates. Fixes: ef3935ee ("arm64: insn: Add encoder for bitwise operations using literals") Suggested-by:
Will Deacon <will@kernel.org>
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200508181547.24783-2-luke.r.nels@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Andy Shevchenko authored
stable inclusion from linux-4.19.129 commit f8f72a29018bad55b5e6f4da22e4275ba0bc461c -------------------------------- [ Upstream commit 3cb97e22 ] Some DMA controller drivers do not tolerate non-zero values in the DMA configuration structures. Zero them to avoid issues with such DMA controller drivers. Even despite above this is a good practice per se. Fixes: 7063c0d9 ("spi/dw_spi: add DMA support") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20200506153025.21441-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Barret Rhoden authored
stable inclusion from linux-4.19.129 commit 28292eb6dda1ecfe1549a7e444f1c5d8c8489d92 -------------------------------- commit 2ed6edd3 upstream. Under rare circumstances, task_function_call() can repeatedly fail and cause a soft lockup. There is a slight race where the process is no longer running on the cpu we targeted by the time remote_function() runs. The code will simply try again. If we are very unlucky, this will continue to fail, until a watchdog fires. This can happen in a heavily loaded, multi-core virtual machine. Reported-by:
<syzbot+bb4935a5c09b5ff79940@syzkaller.appspotmail.com>
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200414222920.121401-1-brho@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
王海 authored
stable inclusion from linux-4.19.129 commit 53bb2a6566fb84d2ce3d36ecd42af5cb9c34f14e -------------------------------- commit dde3c6b7 upstream. syzkaller reports for memory leak when kobject_init_and_add() returns an error in the function sysfs_slab_add() [1] When this happened, the function kobject_put() is not called for the corresponding kobject, which potentially leads to memory leak. This patch fixes the issue by calling kobject_put() even if kobject_init_and_add() fails. [1] BUG: memory leak unreferenced object 0xffff8880a6d4be88 (size 8): comm "syz-executor.3", pid 946, jiffies 4295772514 (age 18.396s) hex dump (first 8 bytes): 70 69 64 5f 33 00 ff ff pid_3... backtrace: kstrdup+0x35/0x70 mm/util.c:60 kstrdup_const+0x3d/0x50 mm/util.c:82 kvasprintf_const+0x112/0x170 lib/kasprintf.c:48 kobject_set_name_vargs+0x55/0x130 lib/kobject.c:289 kobject_add_varg lib/kobject.c:384 [inline] kobject_init_and_add+0xd8/0x170 lib/kobject.c:473 sysfs_slab_add+0x1d8/0x290 mm/slub.c:5811 __kmem_cache_create+0x50a/0x570 mm/slub.c:4384 create_cache+0x113/0x1e0 mm/slab_common.c:407 kmem_cache_create_usercopy+0x1a1/0x260 mm/slab_common.c:505 kmem_cache_create+0xd/0x10 mm/slab_common.c:564 create_pid_cachep kernel/pid_namespace.c:54 [inline] create_pid_namespace kernel/pid_namespace.c:96 [inline] copy_pid_ns+0x77c/0x8f0 kernel/pid_namespace.c:148 create_new_namespaces+0x26b/0xa30 kernel/nsproxy.c:95 unshare_nsproxy_namespaces+0xa7/0x1e0 kernel/nsproxy.c:229 ksys_unshare+0x3d2/0x770 kernel/fork.c:2969 __do_sys_unshare kernel/fork.c:3037 [inline] __se_sys_unshare kernel/fork.c:3035 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3035 do_syscall_64+0xa1/0x530 arch/x86/entry/common.c:295 Fixes: 80da026a ("mm/slub: fix slab double-free in case of duplicate sysfs filename") Reported-by:
Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200602115033.1054-1-wanghai38@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Eric W. Biederman authored
stable inclusion from linux-4.19.129 commit de13aebcf5a812fc9bd70fac7dd7a47bbf9cc3ef -------------------------------- commit ef1548ad upstream. Recently syzbot reported that unmounting proc when there is an ongoing inotify watch on the root directory of proc could result in a use after free when the watch is removed after the unmount of proc when the watcher exits. Commit 69879c01 ("proc: Remove the now unnecessary internal mount of proc") made it easier to unmount proc and allowed syzbot to see the problem, but looking at the code it has been around for a long time. Looking at the code the fsnotify watch should have been removed by fsnotify_sb_delete in generic_shutdown_super. Unfortunately the inode was allocated with new_inode_pseudo instead of new_inode so the inode was not on the sb->s_inodes list. Which prevented fsnotify_unmount_inodes from finding the inode and removing the watch as well as made it so the "VFS: Busy inodes after unmount" warning could not find the inodes to warn about them. Make all of the inodes in proc visible to generic_shutdown_super, and fsnotify_sb_delete by using new_inode instead of new_inode_pseudo. The only functional difference is that new_inode places the inodes on the sb->s_inodes list. I wrote a small test program and I can verify that without changes it can trigger this issue, and by replacing new_inode_pseudo with new_inode the issues goes away. Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/000000000000d788c905a7dfa3f4@google.com Reported-by:
<syzbot+7d2debdcdb3cb93c1e5e@syzkaller.appspotmail.com>
Fixes: 0097875b ("proc: Implement /proc/thread-self to point at the directory of the current thread")
Fixes: 021ada7d ("procfs: switch /proc/self away from proc_dir_entry")
Fixes: 51f0885e ("vfs,proc: guarantee unique inodes in /proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Yuxuan Shui authored
stable inclusion from linux-4.19.129 commit cab0f4ae8b6f07eedda6f2ccaa8eec345f8040cc -------------------------------- commit 520da69d upstream. In ovl_copy_xattr, if all the xattrs to be copied are overlayfs private xattrs, the copy loop will terminate without assigning anything to the error variable, thus returning an uninitialized value. If ovl_copy_xattr is called from ovl_clear_empty, this uninitialized error value is put into a pointer by ERR_PTR(), causing potential invalid memory accesses down the line. This commit initialize error with 0. This is the correct value because when there's no xattr to copy, because all xattrs are private, ovl_copy_xattr should succeed. This bug is discovered with the help of INIT_STACK_ALL and clang. Signed-off-by:
Yuxuan Shui <yshuiv7@gmail.com>
Link: https://bugs.chromium.org/p/chromium/issues/detail?id=1050405
Fixes: 0956254a ("ovl: don't copy up opaqueness")
Cc: stable@vger.kernel.org # v4.8
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Lukas Wunner authored
stable inclusion from linux-4.19.129 commit 675efd2778ce532d9492617d564426434c8be02c -------------------------------- [ Upstream commit 84855678 ] When an SPI controller unregisters, it unbinds all its slave devices. For this, their drivers may need to access the SPI bus, e.g. to quiesce interrupts. However since commit ffbbdd21 ("spi: create a message queueing infrastructure"), spi_destroy_queue() is executed before unbinding the slaves. It sets ctlr->running = false, thereby preventing SPI bus access and causing unbinding of slave devices to fail. Fix by unbinding slaves before calling spi_destroy_queue(). Fixes: ffbbdd21 ("spi: create a message queueing infrastructure") Signed-off-by:
Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.4+
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/8aaf9d44c153fe233b17bc2dec4eb679898d7e7b.1589557526.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Andy Shevchenko authored
stable inclusion from linux-4.19.129 commit 03a381292891560d7347a0a0ee4f6875bf8065a5 -------------------------------- [ Upstream commit ebc37af5 ] The device_for_each_child() doesn't require the returned value to be checked. Thus, drop the dummy variable completely and have no warning anymore: drivers/spi/spi.c: In function ‘spi_unregister_controller’: drivers/spi/spi.c:2480:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] int dummy; ^~~~~ Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Lukas Wunner authored
stable inclusion from linux-4.19.129 commit 21d018ef732c7bf0c98941b1b0f67f3915b93afe -------------------------------- commit ca8b19d6 upstream. The Designware SPI driver uses devm_spi_register_controller() on bind. As a consequence, on unbind, __device_release_driver() first invokes dw_spi_remove_host() before unregistering the SPI controller via devres_release_all(). This order is incorrect: dw_spi_remove_host() shuts down the chip, rendering the SPI bus inaccessible even though the SPI controller is still registered. When the SPI controller is subsequently unregistered, it unbinds all its slave devices. Because their drivers cannot access the SPI bus, e.g. to quiesce interrupts, the slave devices may be left in an improper state. As a rule, devm_spi_register_controller() must not be used if the ->remove() hook performs teardown steps which shall be performed after unregistering the controller and specifically after unbinding of slaves. Fix by reverting to the non-devm variant of spi_register_controller(). An alternative approach would be to use device-managed functions for all steps in dw_spi_remove_host(), e.g. by calling devm_add_action_or_reset() on probe. However that approach would add more LoC to the driver and it wouldn't lend itself as well to backporting to stable. Fixes: 04f421e7 ("spi: dw: use managed resources") Signed-off-by:
Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org # v3.14+
Cc: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/3fff8cb8ae44a9893840d0688be15bb88c090a14.1590408496.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Qiushi Wu authored
stable inclusion from linux-4.19.129 commit c1348a561d567bb1edcded41f720d6c8a178f96d -------------------------------- commit 4d8be4bc upstream. kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb7183" fixed a similar problem. Fixes: 158c998e ("ACPI / CPPC: add sysfs support to compute delivered performance") Signed-off-by:
Qiushi Wu <wu000273@umn.edu>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Qiushi Wu authored
stable inclusion from linux-4.19.129 commit efb4903f931a5955ee34fd1be89efa601b761961 -------------------------------- commit 6e6c2528 upstream. kobject_init_and_add() takes reference even when it fails. Thus, when kobject_init_and_add() returns an error, kobject_put() must be called to properly clean up the kobject. Fixes: 3f8055c3 ("ACPI / hotplug: Introduce user space interface for hotplug profiles") Signed-off-by:
Qiushi Wu <wu000273@umn.edu>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Ard Biesheuvel authored
stable inclusion from linux-4.19.129 commit 7ba9be0ba0ce951deeaa057bfcf01f2b21a5b89a -------------------------------- commit d8bd8c6e upstream. The documentation provided by kobject_init_and_add() clearly spells out the need to call kobject_put() on the kobject if an error is returned. Add this missing call to the error path. Cc: <stable@vger.kernel.org> Reported-by:
亿一 <teroincn@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Miklos Szeredi authored
stable inclusion from linux-4.19.129 commit e4df4140aceb68ac9fd0258e5a03300e0f35a246 -------------------------------- commit 530f32fc upstream. Avi Kivity reports that on fuse filesystems running in a user namespace asyncronous fsync fails with EOVERFLOW. The reason is that f_ops->fsync() is called with the creds of the kthread performing aio work instead of the creds of the process originally submitting IOCB_CMD_FSYNC. Fuse sends the creds of the caller in the request header and it needs to translate the uid and gid into the server's user namespace. Since the kthread is running in init_user_ns, the translation will fail and the operation returns an error. It can be argued that fsync doesn't actually need any creds, but just zeroing out those fields in the header (as with requests that currently don't take creds) is a backward compatibility risk. Instead of working around this issue in fuse, solve the core of the problem by calling the filesystem with the proper creds. Reported-by:
Avi Kivity <avi@scylladb.com>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Fixes: c9582eb0 ("fuse: Fail all requests with invalid uids or gids")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Waiman Long authored
stable inclusion from linux-4.19.129 commit cdfd1ec69045872a8deb873cc22fb49cbbf264a3 -------------------------------- [ Upstream commit d4eaa283 ] For kvmalloc'ed data object that contains sensitive information like cryptographic keys, we need to make sure that the buffer is always cleared before freeing it. Using memset() alone for buffer clearing may not provide certainty as the compiler may compile it away. To be sure, the special memzero_explicit() has to be used. This patch introduces a new kvfree_sensitive() for freeing those sensitive data objects allocated by kvmalloc(). The relevant places where kvfree_sensitive() can be used are modified to use it. Fixes: 4f088249 ("KEYS: Avoid false positive ENOMEM error on key read") Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Link: http://lkml.kernel.org/r/20200407200318.11711-1-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Jens Axboe authored
stable inclusion from linux-4.19.129 commit e147393117d97a8601014650d3625c2230aed06e -------------------------------- [ Upstream commit 18f855e5 ] Stefano reported a crash with using SQPOLL with io_uring: BUG: kernel NULL pointer dereference, address: 00000000000003b0 CPU: 2 PID: 1307 Comm: io_uring-sq Not tainted 5.7.0-rc7 #11 RIP: 0010:task_numa_work+0x4f/0x2c0 Call Trace: task_work_run+0x68/0xa0 io_sq_thread+0x252/0x3d0 kthread+0xf9/0x130 ret_from_fork+0x35/0x40 which is task_numa_work() oopsing on current->mm being NULL. The task work is queued by task_tick_numa(), which checks if current->mm is NULL at the time of the call. But this state isn't necessarily persistent, if the kthread is using use_mm() to temporarily adopt the mm of a task. Change the task_tick_numa() check to exclude kernel threads in general, as it doesn't make sense to attempt ot balance for kthreads anyway. Reported-by:
Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/865de121-8190-5d30-ece5-3b097dc74431@kernel.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Christophe Leroy authored
stable inclusion from linux-4.19.129 commit e18590b3e242638e873a61d299abf8a9df446236 -------------------------------- commit ab10ae1c upstream. The range passed to user_access_begin() by strncpy_from_user() and strnlen_user() starts at 'src' and goes up to the limit of userspace although reads will be limited by the 'count' param. On 32 bits powerpc (book3s/32) access has to be granted for each 256Mbytes segment and the cost increases with the number of segments to unlock. Limit the range with 'count' param. Fixes: 594cc251 ("make 'user_access_begin()' do 'access_ok()'") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Willem de Bruijn authored
stable inclusion from linux-4.19.129 commit 75e36c19ff10836e5d03f87cf17793cf83b59430 -------------------------------- [ Upstream commit 96aa1b22 ] Tun in IFF_NAPI_FRAGS mode calls napi_gro_frags. Unlike netif_rx and netif_gro_receive, this expects skb->data to point to the mac layer. But skb_probe_transport_header, __skb_get_hash_symmetric, and xdp_do_generic in tun_get_user need skb->data to point to the network header. Flow dissection also needs skb->protocol set, so eth_type_trans has to be called. Ensure the link layer header lies in linear as eth_type_trans pulls ETH_HLEN. Then take the same code paths for frags as for not frags. Push the link layer header back just before calling napi_gro_frags. By pulling up to ETH_HLEN from frag0 into linear, this disables the frag0 optimization in the special case when IFF_NAPI_FRAGS is used with zero length iov[0] (and thus empty skb->linear). Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by:
Willem de Bruijn <willemb@google.com>
Acked-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Xinwei Kong authored
stable inclusion from linux-4.19.127 commit a81a1935d135de42c4fa34b640d787e0774be35b -------------------------------- [ Upstream commit bfda0445 ] Because of out-of-order execution about some CPU architecture, In this debug stage we find Completing spi interrupt enable -> prodrucing TXEI interrupt -> running "interrupt_transfer" function will prior to set "dw->rx and dws->rx_end" data, so this patch add memory barrier to enable dw->rx and dw->rx_end to be visible and solve to send SPI data error. eg: it will fix to this following low possibility error in testing environment which using SPI control to connect TPM Modules kernel: tpm tpm0: Operation Timed out kernel: tpm tpm0: tpm_relinquish_locality: : error -1 Signed-off-by:
fengsheng <fengsheng5@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Link: https://lore.kernel.org/r/1578019930-55858-1-git-send-email-kong.kongxinwei@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Tejun Heo authored
stable inclusion from linux-4.19.127 commit 7cbf0e5ceac4fcef5b6a48652733e84c828557c8 -------------------------------- [ Upstream commit d8ef4b38 ] This reverts commit 9a9e97b2 ("cgroup: Add memory barriers to plug cgroup_rstat_updated() race window"). The commit was added in anticipation of memcg rstat conversion which needed synchronous accounting for the event counters (e.g. oom kill count). However, the conversion didn't get merged due to percpu memory overhead concern which couldn't be addressed at the time. Unfortunately, the patch's addition of smp_mb() to cgroup_rstat_updated() meant that every scheduling event now had to go through an additional full barrier and Mel Gorman noticed it as 1% regression in netperf UDP_STREAM test. There's no need to have this barrier in tree now and even if we need synchronous accounting in the future, the right thing to do is separating that out to a separate function so that hot paths which don't care about synchronous behavior don't have to pay the overhead of the full barrier. Let's revert. Signed-off-by:
Tejun Heo <tj@kernel.org>
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Link: http://lkml.kernel.org/r/20200409154413.GK3818@techsingularity.net
Cc: v4.18+
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Qiushi Wu authored
stable inclusion from linux-4.19.126 commit 0dc3cd0981c78d0b1669104aa9d28e3c3ce5460c -------------------------------- [ Upstream commit 7cc31613 ] kobject_init_and_add() takes reference even when it fails. Thus, when kobject_init_and_add() returns an error, kobject_put() must be called to properly clean up the kobject. Fixes: d72e31c9 ("iommu: IOMMU Groups") Signed-off-by:
Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200527210020.6522-1-wu000273@umn.edu
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Konstantin Khlebnikov authored
stable inclusion from linux-4.19.126 commit 0985f4713e1ee2d3134503e02be9d391e60366f0 -------------------------------- [ Upstream commit 6988f31d ] Replace superfluous VM_BUG_ON() with comment about correct usage. Technically reverts commit 1d148e21 ("mm: add VM_BUG_ON_PAGE() to page_mapcount()"), but context lines have changed. Function isolate_migratepages_block() runs some checks out of lru_lock when choose pages for migration. After checking PageLRU() it checks extra page references by comparing page_count() and page_mapcount(). Between these two checks page could be removed from lru, freed and taken by slab. As a result this race triggers VM_BUG_ON(PageSlab()) in page_mapcount(). Race window is tiny. For certain workload this happens around once a year. page:ffffea0105ca9380 count:1 mapcount:0 mapping:ffff88ff7712c180 index:0x0 compound_mapcount: 0 flags: 0x500000000008100(slab|head) raw: 0500000000008100 dead000000000100 dead000000000200 ffff88ff7712c180 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(PageSlab(page)) ------------[ cut here ]------------ kernel BUG at ./include/linux/mm.h:628! invalid opcode: 0000 [#1] SMP NOPTI CPU: 77 PID: 504 Comm: kcompactd1 Tainted: G W 4.19.109-27 #1 Hardware name: Yandex T175-N41-Y3N/MY81-EX0-Y3N, BIOS R05 06/20/2019 RIP: 0010:isolate_migratepages_block+0x986/0x9b0 The code in isolate_migratepages_block() was added in commit 119d6d59 ("mm, compaction: avoid isolating pinned pages") before adding VM_BUG_ON into page_mapcount(). This race has been predicted in 2015 by Vlastimil Babka (see link below). [akpm@linux-foundation.org: comment tweaks, per Hugh] Fixes: 1d148e21 ("mm: add VM_BUG_ON_PAGE() to page_mapcount()") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/159032779896.957378.7852761411265662220.stgit@buzz
Link: https://lore.kernel.org/lkml/557710E1.6060103@suse.cz/
Link: https://lore.kernel.org/linux-mm/158937872515.474360.5066096871639561424.stgit@buzz/T/
(v1)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Eric W. Biederman authored
stable inclusion from linux-4.19.126 commit 6c45ea17efe78addf03c586690cf8ba9cc0a1839 -------------------------------- [ Upstream commit a4ae32c7 ] An invariant of cap_bprm_set_creds is that every field in the new cred structure that cap_bprm_set_creds might set, needs to be set every time to ensure the fields does not get a stale value. The field cap_ambient is not set every time cap_bprm_set_creds is called, which means that if there is a suid or sgid script with an interpreter that has neither the suid nor the sgid bits set the interpreter should be able to accept ambient credentials. Unfortuantely because cap_ambient is not reset to it's original value the interpreter can not accept ambient credentials. Given that the ambient capability set is expected to be controlled by the caller, I don't think this is particularly serious. But it is definitely worth fixing so the code works correctly. I have tested to verify my reading of the code is correct and the interpreter of a sgid can receive ambient capabilities with this change and cannot receive ambient capabilities without this change. Cc: stable@vger.kernel.org Cc: Andy Lutomirski <luto@kernel.org> Fixes: 58319057 ("capabilities: ambient capabilities") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Daniel Jordan authored
stable inclusion from linux-4.19.125 commit 189b4cfafe61fc236b467d427c01d00d77876662 -------------------------------- [ Upstream commit 065cf577 ] With the removal of the padata timer, padata_do_serial no longer needs special CPU handling, so remove it. Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Daniel Jordan authored
stable inclusion from linux-4.19.125 commit 1538674ceea853dc922c0a56dda331fb9b359d2e -------------------------------- [ Upstream commit ec9c7d19 ] Exercising CPU hotplug on a 5.2 kernel with recent padata fixes from cryptodev-2.6.git in an 8-CPU kvm guest... # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3 # echo 0 > /sys/devices/system/cpu/cpu1/online # echo c > /sys/kernel/pcrypt/pencrypt/parallel_cpumask # modprobe tcrypt mode=215 ...caused the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 134 Comm: kworker/2:2 Not tainted 5.2.0-padata-base+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-<snip> Workqueue: pencrypt padata_parallel_worker RIP: 0010:padata_reorder+0xcb/0x180 ... Call Trace: padata_do_serial+0x57/0x60 pcrypt_aead_enc+0x3a/0x50 [pcrypt] padata_parallel_worker+0x9b/0xe0 process_one_work+0x1b5/0x3f0 worker_thread+0x4a/0x3c0 ... In padata_alloc_pd, pd->cpu is set using the user-supplied cpumask instead of the effective cpumask, and in this case cpumask_first picked an offline CPU. The offline CPU's reorder->list.next is NULL in padata_reorder because the list wasn't initialized in padata_init_pqueues, which only operates on CPUs in the effective mask. Fix by using the effective mask in padata_alloc_pd. Fixes: 6fc4dbcf ("padata: Replace delayed timer with immediate workqueue in padata_reorder") Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Herbert Xu authored
stable inclusion from linux-4.19.125 commit 4252abf74253d8e5d32ccc7f4bdcdfaac65daf13 -------------------------------- [ Upstream commit 6fc4dbcf ] The function padata_reorder will use a timer when it cannot progress while completed jobs are outstanding (pd->reorder_objects > 0). This is suboptimal as if we do end up using the timer then it would have introduced a gratuitous delay of one second. In fact we can easily distinguish between whether completed jobs are outstanding and whether we can make progress. All we have to do is look at the next pqueue list. This patch does that by replacing pd->processed with pd->cpu so that the next pqueue is more accessible. A work queue is used instead of the original try_again to avoid hogging the CPU. Note that we don't bother removing the work queue in padata_flush_queues because the whole premise is broken. You cannot flush async crypto requests so it makes no sense to even try. A subsequent patch will fix it by replacing it with a ref counting scheme. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
[dj: - adjust context
- corrected setup_timer -> timer_setup to delete hunk
- skip padata_flush_queues() hunk, function already removed
in 4.19]
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Al Viro authored
stable inclusion from linux-4.19.125 commit b23af87aabc04ee63935b7f80664f2b36f74fdef -------------------------------- [ Upstream commit 4e89b721 ] cpy and set really should be size_t; we won't get an overflow on that, since sysctl_nr_open can't be set above ~(size_t)0 / sizeof(void *), so nr that would've managed to overflow size_t on that multiplication won't get anywhere near copy_fdtable() - we'll fail with EMFILE before that. Cc: stable@kernel.org # v2.6.25+ Fixes: 9cfe015a (get rid of NR_OPEN and introduce a sysctl_nr_open) Reported-by:
Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Eric W. Biederman authored
stable inclusion from linux-4.19.124 commit bfdb18282b6ff1374b4c1a0869fe7ad831fc0aef -------------------------------- commit f87d1c95 upstream. I goofed when I added mm->user_ns support to would_dump. I missed the fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and binfmt_script bprm->file is reassigned. Which made the move of would_dump from setup_new_exec to __do_execve_file before exec_binprm incorrect as it can result in would_dump running on the script instead of the interpreter of the script. The net result is that the code stopped making unreadable interpreters undumpable. Which allows them to be ptraced and written to disk without special permissions. Oops. The move was necessary because the call in set_new_exec was after bprm->mm was no longer valid. To correct this mistake move the misplaced would_dump from __do_execve_file into flos_old_exec, before exec_mmap is called. I tested and confirmed that without this fix I can attach with gdb to a script with an unreadable interpreter, and with this fix I can not. Cc: stable@vger.kernel.org Fixes: f84df2a6 ("exec: Ensure mm->user_ns contains the execed files") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Adam McCoy authored
stable inclusion from linux-4.19.124 commit ad149b6e08f1ee582f1d2ffa747f463e9b6f1c40 -------------------------------- commit a4813799 upstream. Failed async writes that are requeued may not clean up a refcount on the file, which can result in a leaked open. This scenario arises very reliably when using persistent handles and a reconnect occurs while writing. cifs_writev_requeue only releases the reference if the write fails (rc != 0). The server->ops->async_writev operation will take its own reference, so the initial reference can always be released. Signed-off-by:
Adam McCoy <adam@forsedomani.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Christoph Hellwig authored
stable inclusion from linux-4.19.124 commit 63e320a09544dfbae7ceb1b43d4a768bca285325 -------------------------------- [ Upstream commit d51c2145 ] The second argument is the end "pointer", not the length. Fixes: d28f6df1 ("arm64/kexec: Add core kexec support") Cc: <stable@vger.kernel.org> # 4.8.x- Signed-off-by:
Christoph Hellwig <hch@lst.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Dave Wysochanski authored
stable inclusion from linux-4.19.124 commit 0840f672836387a9bd1153136a9a498f3292cc6f -------------------------------- [ Upstream commit 50eaa652 ] Commit 402cb8dd ("fscache: Attach the index key and aux data to the cookie") added the aux_data and aux_data_len to parameters to fscache_acquire_cookie(), and updated the callers in the NFS client. In the process it modified the aux_data to include the change_attr, but missed adding change_attr to a couple places where aux_data was used. Specifically, when opening a file and the change_attr is not added, the following attempt to lookup an object will fail inside cachefiles_check_object_xattr() = -116 due to nfs_fscache_inode_check_aux() failing memcmp on auxdata and returning FSCACHE_CHECKAUX_OBSOLETE. Fix this by adding nfs_fscache_update_auxdata() to set the auxdata from all relevant fields in the inode, including the change_attr. Fixes: 402cb8dd ("fscache: Attach the index key and aux data to the cookie") Signed-off-by:
Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Arnd Bergmann authored
stable inclusion from linux-4.19.124 commit d8b16f4ab334d87e2ca5b638ce4eaaa2f71f5e24 -------------------------------- [ Upstream commit 6e31ded6 ] nfs currently behaves differently on 32-bit and 64-bit kernels regarding the on-disk format of nfs_fscache_inode_auxdata. That format should really be the same on any kernel, and we should avoid the 'timespec' type in order to remove that from the kernel later on. Using plain 'timespec64' would not be good here, since that includes implied padding and would possibly leak kernel stack data to the on-disk format on 32-bit architectures. struct __kernel_timespec would work as a replacement, but open-coding the two struct members in nfs_fscache_inode_auxdata makes it more obvious what's going on here, and keeps the current format for 64-bit architectures. Cc: David Howells <dhowells@redhat.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Dave Wysochanski authored
stable inclusion from linux-4.19.124 commit f61787f77dd7256306a817735eff564112922f8e -------------------------------- [ Upstream commit d9bfced1 ] Commit 402cb8dd ("fscache: Attach the index key and aux data to the cookie") added the index_key and index_key_len parameters to fscache_acquire_cookie(), and updated the callers in the NFS client. One of the callers was inside nfs_fscache_get_super_cookie() and was changed to use the full struct nfs_fscache_key as the index_key. However, a couple members of this structure contain pointers and thus will change each time the same NFS share is remounted. Since index_key is used for fscache_cookie->key_hash and this subsequently is used to compare cookies, the effectiveness of fscache with NFS is reduced to the point at which a umount occurs. Any subsequent remount of the same share will cause a unique NFS super_block index_key and key_hash to be generated for the same data, rendering any prior fscache data unable to be found. A simple reproducer demonstrates the problem. 1. Mount share with 'fsc', create a file, drop page cache systemctl start cachefilesd mount -o vers=3,fsc 127.0.0.1:/export /mnt dd if=/dev/zero of=/mnt/file1.bin bs=4096 count=1 echo 3 > /proc/sys/vm/drop_caches 2. Read file into page cache and fscache, then unmount dd if=/mnt/file1.bin of=/dev/null bs=4096 count=1 umount /mnt 3. Remount and re-read which should come from fscache mount -o vers=3,fsc 127.0.0.1:/export /mnt echo 3 > /proc/sys/vm/drop_caches dd if=/mnt/file1.bin of=/dev/null bs=4096 count=1 4. Check for READ ops in mountstats - there should be none grep READ: /proc/self/mountstats Looking at the history and the removed function, nfs_super_get_key(), we should only use nfs_fscache_key.key plus any uniquifier, for the fscache index_key. Fixes: 402cb8dd ("fscache: Attach the index key and aux data to the cookie") Signed-off-by:
Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Vasily Averin authored
stable inclusion from linux-4.19.124 commit 15e0db6e61c00a7abc64cfcac583637c0707bcfb -------------------------------- [ Upstream commit 5e698222 ] Commit 89163f93 ("ipc/util.c: sysvipc_find_ipc() should increase position index") is causing this bug (seen on 5.6.8): # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages # ipcmk -Q Message queue id: 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 # ipcmk -Q Message queue id: 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcrm -q 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 2 # ipcrm -q 2 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 3 # ipcrm -q 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 Whenever an IPC item with a low id is deleted, the items with higher ids are duplicated, as if filling a hole. new_pos should jump through hole of unused ids, pos can be updated inside "for" cycle. Fixes: 89163f93 ("ipc/util.c: sysvipc_find_ipc() should increase position index") Reported-by:
Andreas Schwab <schwab@suse.de>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/4921fe9b-9385-a2b4-1dc4-1099be6d2e39@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Heiner Kallweit authored
stable inclusion from linux-4.19.124 commit 9a949267f271dfe6651a09b579e31da3b80523c0 -------------------------------- [ Upstream commit 9de5d235 ] phy_restart_aneg() enables aneg in the PHY. That's not what we want if phydev->autoneg is disabled. In this case still update EEE advertisement register, but don't enable aneg and don't trigger an aneg restart. Fixes: f75abeb8 ("net: phy: restart phy autonegotiation after EEE advertisment change") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> -
Stefan Hajnoczi authored
stable inclusion from linux-4.19.124 commit 3c11fec8151972c93fba530fcdd752a40f794296 -------------------------------- [ Upstream commit 90b5feb8 ] A userspace process holding a file descriptor to a virtio_blk device can still invoke block_device_operations after hot unplug. This leads to a use-after-free accessing vblk->vdev in virtblk_getgeo() when ioctl(HDIO_GETGEO) is invoked: BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 IP: [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio] PGD 800000003a92f067 PUD 3a930067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 1310 Comm: hdio-getgeo Tainted: G OE ------------ 3.10.0-1062.el7.x86_64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 task: ffff9be5fbfb8000 ti: ffff9be5fa890000 task.ti: ffff9be5fa890000 RIP: 0010:[<ffffffffc00e5450>] [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio] RSP: 0018:ffff9be5fa893dc8 EFLAGS: 00010246 RAX: ffff9be5fc3f3400 RBX: ffff9be5fa893e30 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff9be5fbc10b40 RBP: ffff9be5fa893dc8 R08: 0000000000000301 R09: 0000000000000301 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9be5fdc24680 R13: ffff9be5fbc10b40 R14: ffff9be5fbc10480 R15: 0000000000000000 FS: 00007f1bfb968740(0000) GS:ffff9be5ffc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000090 CR3: 000000003a894000 CR4: 0000000000360ff0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffffc016ac37>] virtblk_getgeo+0x47/0x110 [virtio_blk] [<ffffffff8d3f200d>] ? handle_mm_fault+0x39d/0x9b0 [<ffffffff8d561265>] blkdev_ioctl+0x1f5/0xa20 [<ffffffff8d488771>] block_ioctl+0x41/0x50 [<ffffffff8d45d9e0>] do_vfs_ioctl+0x3a0/0x5a0 [<ffffffff8d45dc81>] SyS_ioctl+0xa1/0xc0 A related problem is that virtblk_remove() leaks the vd_index_ida index when something still holds a reference to vblk->disk during hot unplug. This causes virtio-blk device names to be lost (vda, vdb, etc). Fix these issues by protecting vblk->vdev with a mutex and reference counting vblk so the vd_index_ida index can be removed in all cases. Fixes: 48e4043d ("virtio: add virtio disk geometry feature") Reported-by:
Lance Digby <ldigby@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200430140442.171016-1-stefanha@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
-