Merge tag 'devicetree-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree fixes from Rob Herring:

 - Another round of whack-a-mole removing 'allOf', redundant cases of
   'maxItems' and incorrect 'reg' sizes

 - Fix support for yaml.h in non-standard paths

* tag 'devicetree-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Remove redundant 'maxItems'
  dt-bindings: Fix more incorrect 'reg' property sizes in examples
  dt-bindings: phy: qcom: Fix missing 'ranges' and example addresses
  dt-bindings: Remove more cases of 'allOf' containing a '$ref'
  scripts/dtc: use pkg-config to include <yaml.h> in non-standard path

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml

@@ -85,9 +85,8 @@ properties:
       CPU power good signal from external PMIC to PMC is enabled.
 
   nvidia,suspend-mode:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
     description:
       The suspend mode that the platform should use.
       Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh

Documentation/devicetree/bindings/ata/sata_highbank.yaml

@@ -40,28 +40,25 @@ properties:
 
   calxeda,led-order:
     description: Maps port numbers to offsets within the SGPIO bitstream.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 8
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
 
   calxeda,port-phys:
     description: |
       phandle-combophy and lane assignment, which maps each SATA port to a
       combophy and a lane within that combophy
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle-array
-      - minItems: 1
-        maxItems: 8
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 8
 
   calxeda,tx-atten:
     description: |
       Contains TX attenuation override codes, one per port.
       The upper 24 bits of each entry are always 0 and thus ignored.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
-        maxItems: 8
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
 
   calxeda,sgpio-gpio:
     description: |

Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml

@@ -71,8 +71,8 @@ examples:
 
     bus@1f059000 {
       compatible = "baikal,bt1-apb", "simple-bus";
-      reg = <0 0x1f059000 0 0x1000>,
-            <0 0x1d000000 0 0x2040000>;
+      reg = <0x1f059000 0x1000>,
+            <0x1d000000 0x2040000>;
       reg-names = "ehb", "nodev";
       #address-cells = <1>;
       #size-cells = <1>;

Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml

@@ -85,8 +85,8 @@ examples:
 
     bus@1f05a000 {
       compatible = "baikal,bt1-axi", "simple-bus";
-      reg = <0 0x1f05a000 0 0x1000>,
-            <0 0x1f04d110 0 0x8>;
+      reg = <0x1f05a000 0x1000>,
+            <0x1f04d110 0x8>;
       reg-names = "qos", "ehb";
       #address-cells = <1>;
       #size-cells = <1>;

Documentation/devicetree/bindings/clock/imx6q-clock.yaml

@@ -23,7 +23,6 @@ properties:
     items:
       - description: CCM interrupt request 1
       - description: CCM interrupt request 2
-    maxItems: 2
 
   '#clock-cells':
     const: 1

Documentation/devicetree/bindings/clock/imx6sl-clock.yaml

@@ -23,7 +23,6 @@ properties:
     items:
       - description: CCM interrupt request 1
       - description: CCM interrupt request 2
-    maxItems: 2
 
   '#clock-cells':
     const: 1

Documentation/devicetree/bindings/clock/imx6sll-clock.yaml

@@ -23,7 +23,6 @@ properties:
     items:
       - description: CCM interrupt request 1
       - description: CCM interrupt request 2
-    maxItems: 2
 
   '#clock-cells':
     const: 1

Documentation/devicetree/bindings/clock/imx6sx-clock.yaml

@@ -23,7 +23,6 @@ properties:
     items:
       - description: CCM interrupt request 1
       - description: CCM interrupt request 2
-    maxItems: 2
 
   '#clock-cells':
     const: 1

Documentation/devicetree/bindings/clock/imx6ul-clock.yaml

@@ -23,7 +23,6 @@ properties:
     items:
       - description: CCM interrupt request 1
       - description: CCM interrupt request 2
-    maxItems: 2
 
   '#clock-cells':
     const: 1

Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml

@@ -106,8 +106,8 @@ examples:
     #include <dt-bindings/power/rk3288-power.h>
     vopb: vopb@ff930000 {
       compatible = "rockchip,rk3288-vop";
-      reg = <0x0 0xff930000 0x0 0x19c>,
-            <0x0 0xff931000 0x0 0x1000>;
+      reg = <0xff930000 0x19c>,
+            <0xff931000 0x1000>;
       interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
       clocks = <&cru ACLK_VOP0>,
                <&cru DCLK_VOP0>,

Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml

@@ -63,11 +63,10 @@ patternProperties:
 
       snps,nr-gpios:
         description: The number of GPIO pins exported by the port.
+        $ref: /schemas/types.yaml#/definitions/uint32
         default: 32
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 1
-            maximum: 32
+        minimum: 1
+        maximum: 32
 
       interrupts:
         description: |

Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml

@@ -67,8 +67,7 @@ properties:
       1 - direct_sync
       2 - scaled_sync
       3 - pulse_sync
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 

Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml

@@ -25,9 +25,8 @@ properties:
 
   amstaos,cover-comp-gain:
     description: Multiplier for gain compensation
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 16]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 16]
 
 required:
   - compatible

Documentation/devicetree/bindings/input/iqs269a.yaml

@@ -40,10 +40,9 @@ properties:
       posed on channels 6 and 7 by Hall-effect sensing.
 
   azoteq,suspend-mode:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
     description: |
       Specifies the power mode during suspend as follows:
       0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
@@ -56,11 +55,10 @@ properties:
     description: Divides the device's core clock by a factor of 4.
 
   azoteq,ulp-update:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 7
-        default: 3
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 3
     description: Specifies the ultra-low-power mode update rate.
 
   azoteq,reseed-offset:
@@ -70,34 +68,30 @@ properties:
       reseed events.
 
   azoteq,filt-str-lp-lta:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
     description:
       Specifies the long-term average filter strength during low-power mode.
 
   azoteq,filt-str-lp-cnt:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
     description:
       Specifies the raw count filter strength during low-power mode.
 
   azoteq,filt-str-np-lta:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
     description:
       Specifies the long-term average filter strength during normal-power mode.
 
   azoteq,filt-str-np-cnt:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
     description:
       Specifies the raw count filter strength during normal-power mode.
 
@@ -156,11 +150,10 @@ properties:
     description: Disables all raw count filtering.
 
   azoteq,gpio3-select:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-        maximum: 7
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 0
     description:
       Selects the channel for which the GPIO3 pin represents touch state.
 
@@ -172,10 +165,9 @@ properties:
       in either direction.
 
   azoteq,tx-freq:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
     description: |
       Specifies the inductive sensing excitation frequency as follows (paren-
       thesized numbers represent the frequency if 'azoteq,clk-div' is present):
@@ -189,10 +181,9 @@ properties:
     description: Increases the global capacitance adder from 0.5 pF to 1.5 pF.
 
   azoteq,reseed-select:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
     description: |
       Specifies the event(s) that prompt the device to reseed (i.e. reset the
       long-term average) of an associated channel as follows:
@@ -208,10 +199,9 @@ properties:
       channels.
 
   azoteq,filt-str-slider:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [0, 1, 2, 3]
-        default: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 1
     description: Specifies the slider coordinate filter strength.
 
 patternProperties:
@@ -246,27 +236,25 @@ patternProperties:
         description: Specifies that the channel participates in slider 1.
 
       azoteq,rx-enable:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - minItems: 1
-            maxItems: 8
-            items:
-              minimum: 0
-              maximum: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
         description:
           Specifies the CRX pin(s) associated with the channel. By default, only
           the CRX pin corresponding to the channel's index is enabled (e.g. CRX0
           for channel 0).
 
       azoteq,tx-enable:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - minItems: 1
-            maxItems: 8
-            items:
-              minimum: 0
-              maximum: 7
-            default: [0, 1, 2, 3, 4, 5, 6, 7]
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        default: [0, 1, 2, 3, 4, 5, 6, 7]
         description: Specifies the TX pin(s) associated with the channel.
 
       azoteq,meas-cap-decrease:
@@ -279,10 +267,9 @@ patternProperties:
         description: Floats any inactive CRX pins instead of grounding them.
 
       azoteq,local-cap-size:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 2]
-            default: 0
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
         description: |
           Specifies the capacitance to be added to the channel as follows:
           0: None
@@ -296,10 +283,9 @@ patternProperties:
           deep-touch events relative to their respective thresholds.
 
       azoteq,proj-bias:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 2, 3]
-            default: 2
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 2
         description: |
           Specifies the bias current applied during projected-capacitance
           sensing as follows:
@@ -309,10 +295,9 @@ patternProperties:
           3: 20 uA
 
       azoteq,sense-mode:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 9, 14, 15]
-            default: 0
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 9, 14, 15]
+        default: 0
         description: |
           Specifies the channel's sensing mode as follows:
           0:  Self capacitance
@@ -322,10 +307,9 @@ patternProperties:
           15: Temperature
 
       azoteq,sense-freq:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 2, 3]
-            default: 1
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
         description: |
           Specifies the channel's sensing frequency as follows (parenthesized
           numbers represent the frequency if 'azoteq,clk-div' is present):
@@ -339,10 +323,9 @@ patternProperties:
         description: Enables the static front-end for the channel.
 
       azoteq,ati-mode:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 2, 3]
-            default: 3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 3
         description: |
           Specifies the channel's ATI mode as follows:
           0: Disabled
@@ -351,39 +334,35 @@ patternProperties:
           3: Full
 
       azoteq,ati-base:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [75, 100, 150, 200]
-            default: 100
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [75, 100, 150, 200]
+        default: 100
         description: Specifies the channel's ATI base.
 
       azoteq,ati-target:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - multipleOf: 32
-            minimum: 0
-            maximum: 2016
-            default: 512
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 32
+        minimum: 0
+        maximum: 2016
+        default: 512
         description: Specifies the channel's ATI target.
 
       azoteq,assoc-select:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - minItems: 1
-            maxItems: 8
-            items:
-              minimum: 0
-              maximum: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
         description:
           Specifies the associated channels for which the channel serves as a
           reference channel. By default, no channels are selected.
 
       azoteq,assoc-weight:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - minimum: 0
-            maximum: 255
-            default: 0
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        default: 0
         description:
           Specifies the channel's impact weight if it acts as an associated
           channel (0 = 0% impact, 255 = 200% impact).
@@ -411,11 +390,10 @@ patternProperties:
 
         properties:
           azoteq,thresh:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
-              - minimum: 0
-                maximum: 255
-                default: 10
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 10
             description: Specifies the threshold for the event.
 
           linux,code:
@@ -430,19 +408,17 @@ patternProperties:
 
         properties:
           azoteq,thresh:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
-              - minimum: 0
-                maximum: 255
-                default: 8
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 8
             description: Specifies the threshold for the event.
 
           azoteq,hyst:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
-              - minimum: 0
-                maximum: 15
-                default: 4
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 15
+            default: 4
             description: Specifies the hysteresis for the event.
 
           linux,code:
@@ -457,19 +433,17 @@ patternProperties:
 
         properties:
           azoteq,thresh:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
-              - minimum: 0
-                maximum: 255
-                default: 26
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 26
             description: Specifies the threshold for the event.
 
           azoteq,hyst:
-            allOf:
-              - $ref: /schemas/types.yaml#/definitions/uint32
-              - minimum: 0
-                maximum: 15
-                default: 0
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 15
+            default: 0
             description: Specifies the hysteresis for the event.
 
           linux,code:

Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml

@@ -25,19 +25,17 @@ properties:
     description:
       u32 value of the base of parent HyperTransport vector allocated
       to PCH MSI.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-        maximum: 255
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 255
 
   loongson,msi-num-vecs:
     description:
       u32 value of the number of parent HyperTransport vectors allocated
       to PCH MSI.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 1
-        maximum: 256
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 1
+    maximum: 256
 
   msi-controller: true
 

Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml

@@ -25,10 +25,9 @@ properties:
     description:
       u32 value of the base of parent HyperTransport vector allocated
       to PCH PIC.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - minimum: 0
-        maximum: 192
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 192
 
   interrupt-controller: true
 

Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml

@@ -31,9 +31,8 @@ properties:
 
   reg-size:
     description: The access width of the register in bytes. Defaults to 1.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 2, 4, 8]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
 
   reg-spacing:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -43,9 +42,8 @@ properties:
     description: |
       The amount of bits to shift the register content to the right to get
       the data into bit zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - maximum: 56
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 56
 
 required:
   - compatible

Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml

@@ -57,8 +57,7 @@ properties:
     description: |
       mA; per-string current limit.
       This property is supported only for WLED3.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 20
     minimum: 0
     maximum: 25
@@ -74,38 +73,33 @@ properties:
   qcom,current-boost-limit:
     description: |
       mA; boost current limit.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   qcom,switching-freq:
     description: |
       kHz; switching frequency.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
 
   qcom,ovp:
     description: |
       V; Over-voltage protection limit.
       This property is supported only for WLED3.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 27, 29, 32, 35 ]
-      - default: 29
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 27, 29, 32, 35 ]
+    default: 29
 
   qcom,ovp-millivolt:
     description: |
       Over-voltage protection limit. This property is for WLED4 only.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 18100, 19600, 29600, 31100 ]
-      - default: 29600
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 18100, 19600, 29600, 31100 ]
+    default: 29600
 
   qcom,num-strings:
     description: |
       number of led strings attached.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   qcom,enabled-strings:
     description: |
@@ -113,8 +107,7 @@ properties:
       string of leds are operated individually. Specify the
       list of strings used by the device. Any combination of
       led strings can be used.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 4
 
@@ -150,10 +143,9 @@ properties:
            0 - Modulator A
            1 - Modulator B
       This property is applicable only to WLED5 peripheral.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
-      - default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    default: 0
 
   qcom,cabc-sel:
     description: |
@@ -164,9 +156,8 @@ properties:
            2 - CABC 2
            3 - External signal (e.g. LPG) is used for dimming
       This property is applicable only to WLED5 peripheral.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1, 2, 3 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
 
 allOf:
   - if:

Documentation/devicetree/bindings/leds/leds-aw2013.yaml

@@ -32,8 +32,7 @@ properties:
 patternProperties:
   "^led@[0-2]$":
     type: object
-    allOf:
-      - $ref: common.yaml#
+    $ref: common.yaml#
 
     properties:
       reg:

Documentation/devicetree/bindings/leds/leds-sgm3140.yaml

@@ -33,8 +33,7 @@ properties:
 
   led:
     type: object
-    allOf:
-      - $ref: common.yaml#
+    $ref: common.yaml#
 
 required:
   - compatible