Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

MAINTAINERS

@@ -1091,7 +1091,7 @@ F:	arch/arm/boot/dts/aspeed-*
 F:	drivers/*/*aspeed*
 
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
 M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1773,7 +1773,7 @@ F:	drivers/soc/renesas/
 F:	include/linux/soc/renesas/
 
 ARM/SOCFPGA ARCHITECTURE
-M:	Dinh Nguyen <dinguyen@opensource.altera.com>
+M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
 F:	arch/arm/mach-socfpga/
 F:	arch/arm/boot/dts/socfpga*
@@ -1783,7 +1783,7 @@ W:	http://www.rocketboards.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
 ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
-M:	Dinh Nguyen <dinguyen@opensource.altera.com>
+M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
 F:	drivers/clk/socfpga/
 
@@ -2175,56 +2175,56 @@ F:	include/linux/atm*
 F:	include/uapi/linux/atm*
 
 ATMEL AT91 / AT32 MCI DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 
 ATMEL AT91 SAMA5D2-Compatible Shutdown Controller
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 S:	Supported
 F:	drivers/power/reset/at91-sama5d2_shdwc.c
 
 ATMEL SAMA5D2 ADC DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 F:	drivers/iio/adc/at91-sama5d2_adc.c
 
 ATMEL Audio ALSA driver
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/atmel
 
 ATMEL XDMA DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	dmaengine@vger.kernel.org
 S:	Supported
 F:	drivers/dma/at_xdmac.c
 
 ATMEL I2C DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
 F:	drivers/i2c/busses/i2c-at91.c
 
 ATMEL ISI DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 F:	drivers/media/platform/soc_camera/atmel-isi.c
 F:	include/media/atmel-isi.h
 
 ATMEL LCDFB DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/fbdev/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 S:	Supported
 F:	drivers/net/ethernet/cadence/
 
@@ -2236,32 +2236,32 @@ S:	Supported
 F:	drivers/mtd/nand/atmel_nand*
 
 ATMEL SDMMC DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-mmc@vger.kernel.org
 S:	Supported
 F:	drivers/mmc/host/sdhci-of-at91.c
 
 ATMEL SPI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 S:	Supported
 F:	drivers/spi/spi-atmel.*
 
 ATMEL SSC DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/misc/atmel-ssc.c
 F:	include/linux/atmel-ssc.h
 
 ATMEL Timer Counter (TC) AND CLOCKSOURCE DRIVERS
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/misc/atmel_tclib.c
 F:	drivers/clocksource/tcb_clksrc.c
 
 ATMEL USBA UDC DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/udc/atmel_usba_udc.*
@@ -9765,7 +9765,7 @@ S:	Maintained
 F:	drivers/pinctrl/pinctrl-at91.*
 
 PIN CONTROLLER - ATMEL AT91 PIO4
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-gpio@vger.kernel.org
 S:	Supported

arch/arm/boot/dts/Makefile

@@ -617,7 +617,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-lacie-ethernet-disk-mini-v2.dtb \
 	orion5x-linkstation-lsgl.dtb \
 	orion5x-linkstation-lswtgl.dtb \
-	orion5x-lschl.dtb \
+	orion5x-linkstation-lschl.dtb \
 	orion5x-lswsgl.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
 	orion5x-netgear-wnr854t.dtb \

arch/arm/boot/dts/imx1.dtsi

@@ -18,6 +18,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		gpio0 = &gpio1;

arch/arm/boot/dts/imx23.dtsi

@@ -16,6 +16,14 @@
 	#size-cells = <1>;
 
 	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		gpio0 = &gpio0;

arch/arm/boot/dts/imx25.dtsi

@@ -14,6 +14,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx27.dtsi

@@ -19,6 +19,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx28.dtsi

@@ -17,6 +17,14 @@
 	#size-cells = <1>;
 
 	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &mac0;

arch/arm/boot/dts/imx31.dtsi

@@ -12,6 +12,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		serial0 = &uart1;

arch/arm/boot/dts/imx35.dtsi

@@ -13,6 +13,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx50.dtsi

@@ -17,6 +17,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx51.dtsi

@@ -19,6 +19,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx53.dtsi

@@ -19,6 +19,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx6dl.dtsi

@@ -137,7 +137,7 @@
 &gpio4 {
 	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7 150 1>,
 		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10 147 1>,
-		      <&iomuxc 11 151 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
+		      <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
 		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16  39 7>,
 		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31  46 1>;
 };

arch/arm/boot/dts/imx6qdl.dtsi

@@ -16,6 +16,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx6sl.dtsi

@@ -14,6 +14,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx6sx.dtsi

@@ -15,6 +15,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		can0 = &flexcan1;

arch/arm/boot/dts/imx6ul.dtsi

@@ -15,6 +15,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec1;

arch/arm/boot/dts/imx7s.dtsi

@@ -50,6 +50,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		gpio0 = &gpio1;

arch/arm/boot/dts/orion5x-lschl.dts → arch/arm/boot/dts/orion5x-linkstation-lschl.dts

@@ -2,7 +2,7 @@
  * Device Tree file for Buffalo Linkstation LS-CHLv3
  *
  * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk>
- * Copyright (C) 2015, 2016
+ * Copyright (C) 2015-2017
  * Roger Shimizu <rogershimizu@gmail.com>
  *
  * This file is dual-licensed: you can use it either under the terms
@@ -52,7 +52,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Buffalo Linkstation Live v3 (LS-CHL)";
+	model = "Buffalo Linkstation LiveV3 (LS-CHL)";
 	compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory { /* 128 MB */

arch/arm/boot/dts/stih407-family.dtsi

@@ -680,6 +680,7 @@
 				phy-names	= "usb2-phy", "usb3-phy";
 				phys		= <&usb2_picophy0>,
 						  <&phy_port2 PHY_TYPE_USB3>;
+				snps,dis_u3_susphy_quirk;
 			};
 		};