driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5Q63H


CVE: NA

-------------------------------------

When an NCQ error occurs, SAS controller will abnormally complete the I/Os
that newly delivered to disk, and bit8 in CQ dw3 will be set to 1 to
indicate current SATA disk is in error status. The current processing flow
is set ts->stat to SAS_OPEN_REJECT and then sas_ata_task_done() will set
fis stat to ATA_ERR. After analyzed by ata_eh_analyze_tf(), err_mask will
set to AC_ERR_HSM. If media error occurs for four times within 10 minutes
and the chip rejects new I/Os for four times, NCQ will be disabled due to
excessive errors.

However, if media error occurs multiple times, the NCQ mode shouldn't be
disabled. Therefore, use sas_task_abort() to handle abnormally completed
I/Os when SATA disk is in error status.

[10253.397429] hisi_sas_v3_hw 0000:b4:02.0: erroneous completion disk err dev id=2 sas_addr=0x5000000000000605 CQ hdr: 0x400903 0x2007f 0x0 0x80470000
[10253.397430] hisi_sas_v3_hw 0000:b4:02.0: erroneous completion iptt=135 task= pK-error dev id=2 sas_addr=0x5000000000000605 CQ hdr: 0x203 0x20087 0x0 0x100 Error info: 0x0 0x0 0x0 0x0
[10253.397432] hisi_sas_v3_hw 0000:b4:02.0: erroneous completion iptt=136 task= pK-error dev id=2 sas_addr=0x5000000000000605 CQ hdr: 0x203 0x20088 0x0 0x100 Error info: 0x0 0x0 0x0 0x0

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: kang fenglong <kangfenglong@huawei.com>
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>