Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "The 4.6 pile of irq updates contains:

   - Support for IPI irqdomains to support proper integration of IPIs to
     and from coprocessors.  The first user of this new facility is
     MIPS.  The relevant MIPS patches come with the core to avoid merge
     ordering issues and have been acked by Ralf.

   - A new command line option to set the default interrupt affinity
     mask at boot time.

   - Support for some more new ARM and MIPS interrupt controllers:
     tango, alpine-msix and bcm6345-l1

   - Two small cleanups for x86/apic which we merged into irq/core to
     avoid yet another branch in x86 with two tiny commits.

   - The usual set of updates, cleanups in drivers/irqchip.  Mostly in
     the area of ARM-GIC, arada-37-xp and atmel chips.  Nothing
     outstanding here"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
  irqchip/irq-alpine-msi: Release the correct domain on error
  irqchip/mxs: Fix error check of of_io_request_and_map()
  irqchip/sunxi-nmi: Fix error check of of_io_request_and_map()
  genirq: Export IRQ functions for module use
  irqchip/gic/realview: Support more RealView DCC variants
  Documentation/bindings: Document the Alpine MSIX driver
  irqchip: Add the Alpine MSIX interrupt controller
  irqchip/gic-v3: Always return IRQ_SET_MASK_OK_DONE in gic_set_affinity
  irqchip/gic-v3-its: Mark its_init() and its children as __init
  irqchip/gic-v3: Remove gic_root_node variable from the ITS code
  irqchip/gic-v3: ACPI: Add redistributor support via GICC structures
  irqchip/gic-v3: Add ACPI support for GICv3/4 initialization
  irqchip/gic-v3: Refactor gic_of_init() for GICv3 driver
  x86/apic: Deinline _flat_send_IPI_mask, save ~150 bytes
  x86/apic: Deinline __default_send_IPI_*, save ~200 bytes
  dt-bindings: interrupt-controller: Add SoC-specific compatible string to Marvell ODMI
  irqchip/mips-gic: Add new DT property to reserve IPIs
  MIPS: Delete smp-gic.c
  MIPS: Make smp CMP, CPS and MT use the new generic IPI functions
  MIPS: Add generic SMP IPI support
  ...

Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt

+Alpine MSIX controller
+
+See arm,gic-v3.txt for SPI and MSI definitions.
+
+Required properties:
+
+- compatible: should be "al,alpine-msix"
+- reg: physical base address and size of the registers
+- interrupt-parent: specifies the parent interrupt controller.
+- interrupt-controller: identifies the node as an interrupt controller
+- msi-controller: identifies the node as an PCI Message Signaled Interrupt
+		  controller
+- al,msi-base-spi: SPI base of the MSI frame
+- al,msi-num-spis: number of SPIs assigned to the MSI frame, relative to SPI0
+
+Example:
+
+msix: msix {
+	compatible = "al,alpine-msix";
+	reg = <0x0 0xfbe00000 0x0 0x100000>;
+	interrupt-parent = <&gic>;
+	interrupt-controller;
+	msi-controller;
+	al,msi-base-spi = <160>;
+	al,msi-num-spis = <160>;
+};

Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt

@@ -16,6 +16,7 @@ Main node required properties:
 	"arm,cortex-a15-gic"
 	"arm,cortex-a7-gic"
 	"arm,cortex-a9-gic"
+	"arm,eb11mp-gic"
 	"arm,gic-400"
 	"arm,pl390"
 	"arm,tc11mp-gic"

Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt

+
+* Marvell ODMI for MSI support
+
+Some Marvell SoCs have an On-Die Message Interrupt (ODMI) controller
+which can be used by on-board peripheral for MSI interrupts.
+
+Required properties:
+
+- compatible           : The value here should contain:
+
+    "marvell,ap806-odmi-controller", "marvell,odmi-controller".
+
+- interrupt,controller : Identifies the node as an interrupt controller.
+
+- msi-controller       : Identifies the node as an MSI controller.
+
+- marvell,odmi-frames  : Number of ODMI frames available. Each frame
+                         provides a number of events.
+
+- reg                  : List of register definitions, one for each
+                         ODMI frame.
+
+- marvell,spi-base     : List of GIC base SPI interrupts, one for each
+                         ODMI frame. Those SPI interrupts are 0-based,
+                         i.e marvell,spi-base = <128> will use SPI #96.
+                         See Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
+                         for details about the GIC Device Tree binding.
+
+- interrupt-parent     : Reference to the parent interrupt controller.
+
+Example:
+
+	odmi: odmi@300000 {
+		compatible = "marvell,ap806-odm-controller",
+			     "marvell,odmi-controller";
+		interrupt-controller;
+		msi-controller;
+		marvell,odmi-frames = <4>;
+		reg = <0x300000 0x4000>,
+		      <0x304000 0x4000>,
+		      <0x308000 0x4000>,
+		      <0x30C000 0x4000>;
+		marvell,spi-base = <128>, <136>, <144>, <152>;
+	};

Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt

@@ -23,6 +23,12 @@ Optional properties:
 - mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
   to which the GIC may not route interrupts.  Valid values are 2 - 7.
   This property is ignored if the CPU is started in EIC mode.
+- mti,reserved-ipi-vectors : Specifies the range of GIC interrupts that are
+  reserved for IPIs.
+  It accepts 2 values, the 1st is the starting interrupt and the 2nd is the size
+  of the reserved range.
+  If not specified, the driver will allocate the last 2 * number of VPEs in the
+  system.
 
 Required properties for timer sub-node:
 - compatible : Should be "mti,gic-timer".
@@ -44,6 +50,7 @@ Example:
 		#interrupt-cells = <3>;
 
 		mti,reserved-cpu-vectors = <7>;
+		mti,reserved-ipi-vectors = <40 8>;
 
 		timer {
 			compatible = "mti,gic-timer";

Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt

+Sigma Designs SMP86xx/SMP87xx secondary interrupt controller
+
+Required properties:
+- compatible: should be "sigma,smp8642-intc"
+- reg: physical address of MMIO region
+- ranges: address space mapping of child nodes
+- interrupt-parent: phandle of parent interrupt controller
+- interrupt-controller: boolean
+- #address-cells: should be <1>
+- #size-cells: should be <1>
+
+One child node per control block with properties:
+- reg: address of registers for this control block
+- interrupt-controller: boolean
+- #interrupt-cells: should be <2>, interrupt index and flags per interrupts.txt
+- interrupts: interrupt spec of primary interrupt controller
+
+Example:
+
+interrupt-controller@6e000 {
+	compatible = "sigma,smp8642-intc";
+	reg = <0x6e000 0x400>;
+	ranges = <0x0 0x6e000 0x400>;
+	interrupt-parent = <&gic>;
+	interrupt-controller;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	irq0: interrupt-controller@0 {
+		reg = <0x000 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	irq1: interrupt-controller@100 {
+		reg = <0x100 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	irq2: interrupt-controller@300 {
+		reg = <0x300 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};

Documentation/kernel-parameters.txt

@@ -1687,6 +1687,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	ip=		[IP_PNP]
 			See Documentation/filesystems/nfs/nfsroot.txt.
 
+	irqaffinity=	[SMP] Set the default irq affinity mask
+			Format:
+			<cpu number>,...,<cpu number>
+			or
+			<cpu number>-<cpu number>
+			(must be a positive range in ascending order)
+			or a mixture
+			<cpu number>,...,<cpu number>-<cpu number>
+
 	irqfixup	[HW]
 			When an interrupt is not handled search all handlers
 			for it. Intended to get systems with badly broken

MAINTAINERS

@@ -2422,6 +2422,7 @@ F:	arch/mips/bmips/*
 F:	arch/mips/include/asm/mach-bmips/*
 F:	arch/mips/kernel/*bmips*
 F:	arch/mips/boot/dts/brcm/bcm*.dts*
+F:	drivers/irqchip/irq-bcm63*
 F:	drivers/irqchip/irq-bcm7*
 F:	drivers/irqchip/irq-brcmstb*
 F:	include/linux/bcm963xx_nvram.h

arch/arm/mach-mvebu/Kconfig

@@ -3,7 +3,6 @@ menuconfig ARCH_MVEBU
 	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
 	select PINCTRL
 	select PLAT_ORION
 	select SOC_BUS
@@ -29,6 +28,7 @@ config MACH_ARMADA_370
 	bool "Marvell Armada 370 boards"
 	depends on ARCH_MULTI_V7
 	select ARMADA_370_CLK
+	select ARMADA_370_XP_IRQ
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_370
@@ -39,6 +39,7 @@ config MACH_ARMADA_370
 config MACH_ARMADA_375
 	bool "Marvell Armada 375 boards"
 	depends on ARCH_MULTI_V7
+	select ARMADA_370_XP_IRQ
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
@@ -58,6 +59,7 @@ config MACH_ARMADA_38X
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
+	select ARMADA_370_XP_IRQ
 	select ARMADA_38X_CLK
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
@@ -72,6 +74,7 @@ config MACH_ARMADA_39X
 	bool "Marvell Armada 39x boards"
 	depends on ARCH_MULTI_V7
 	select ARM_GIC
+	select ARMADA_370_XP_IRQ
 	select ARMADA_39X_CLK
 	select CACHE_L2X0
 	select HAVE_ARM_SCU
@@ -86,6 +89,7 @@ config MACH_ARMADA_39X
 config MACH_ARMADA_XP
 	bool "Marvell Armada XP boards"
 	depends on ARCH_MULTI_V7
+	select ARMADA_370_XP_IRQ
 	select ARMADA_XP_CLK
 	select CPU_PJ4B
 	select MACH_MVEBU_V7

arch/mips/Kconfig

@@ -151,6 +151,7 @@ config BMIPS_GENERIC
 	select CSRC_R4K
 	select SYNC_R4K
 	select COMMON_CLK
+	select BCM6345_L1_IRQ
 	select BCM7038_L1_IRQ
 	select BCM7120_L2_IRQ
 	select BRCMSTB_L2_IRQ
@@ -2169,7 +2170,6 @@ config MIPS_MT_SMP
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select SYNC_R4K
-	select MIPS_GIC_IPI if MIPS_GIC
 	select MIPS_MT
 	select SMP
 	select SMP_UP
@@ -2267,7 +2267,6 @@ config MIPS_VPE_APSP_API_MT
 config MIPS_CMP
 	bool "MIPS CMP framework support (DEPRECATED)"
 	depends on SYS_SUPPORTS_MIPS_CMP && !CPU_MIPSR6
-	select MIPS_GIC_IPI if MIPS_GIC
 	select SMP
 	select SYNC_R4K
 	select SYS_SUPPORTS_SMP
@@ -2287,7 +2286,6 @@ config MIPS_CPS
 	select MIPS_CM
 	select MIPS_CPC
 	select MIPS_CPS_PM if HOTPLUG_CPU
-	select MIPS_GIC_IPI if MIPS_GIC
 	select SMP
 	select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
 	select SYS_SUPPORTS_HOTPLUG_CPU
@@ -2305,10 +2303,6 @@ config MIPS_CPS_PM
 	select MIPS_CPC
 	bool
 
-config MIPS_GIC_IPI
-	depends on MIPS_GIC
-	bool
-
 config MIPS_CM
 	bool
 

arch/mips/ath79/irq.c

@@ -26,90 +26,6 @@
 #include "common.h"
 #include "machtypes.h"
 
-static void __init ath79_misc_intc_domain_init(
-	struct device_node *node, int irq);
-
-static void ath79_misc_irq_handler(struct irq_desc *desc)
-{
-	struct irq_domain *domain = irq_desc_get_handler_data(desc);
-	void __iomem *base = domain->host_data;
-	u32 pending;
-
-	pending = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS) &
-		  __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-
-	if (!pending) {
-		spurious_interrupt();
-		return;
-	}
-
-	while (pending) {
-		int bit = __ffs(pending);
-
-		generic_handle_irq(irq_linear_revmap(domain, bit));
-		pending &= ~BIT(bit);
-	}
-}
-
-static void ar71xx_misc_irq_unmask(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->hwirq;
-	u32 t;
-
-	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-	__raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-
-	/* flush write */
-	__raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-}
-
-static void ar71xx_misc_irq_mask(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->hwirq;
-	u32 t;
-
-	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-
-	/* flush write */
-	__raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-}
-
-static void ar724x_misc_irq_ack(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->hwirq;
-	u32 t;
-
-	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS);
-	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_STATUS);
-
-	/* flush write */
-	__raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS);
-}
-
-static struct irq_chip ath79_misc_irq_chip = {
-	.name		= "MISC",
-	.irq_unmask	= ar71xx_misc_irq_unmask,
-	.irq_mask	= ar71xx_misc_irq_mask,
-};
-
-static void __init ath79_misc_irq_init(void)
-{
-	if (soc_is_ar71xx() || soc_is_ar913x())
-		ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
-	else if (soc_is_ar724x() ||
-		 soc_is_ar933x() ||
-		 soc_is_ar934x() ||
-		 soc_is_qca955x())
-		ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
-	else
-		BUG();
-
-	ath79_misc_intc_domain_init(NULL, ATH79_CPU_IRQ(6));
-}
 
 static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
 {
@@ -212,142 +128,12 @@ static void qca955x_irq_init(void)
 	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
 }
 
-/*
- * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for
- * these devices typically allocate coherent DMA memory, however the
- * DMA controller may still have some unsynchronized data in the FIFO.
- * Issue a flush in the handlers to ensure that the driver sees
- * the update.
- *
- * This array map the interrupt lines to the DDR write buffer channels.
- */
-
-static unsigned irq_wb_chan[8] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,
-};
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned long pending;
-	int irq;
-
-	pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-	if (!pending) {
-		spurious_interrupt();
-		return;
-	}
-
-	pending >>= CAUSEB_IP;
-	while (pending) {
-		irq = fls(pending) - 1;
-		if (irq < ARRAY_SIZE(irq_wb_chan) && irq_wb_chan[irq] != -1)
-			ath79_ddr_wb_flush(irq_wb_chan[irq]);
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-		pending &= ~BIT(irq);
-	}
-}
-
-static int misc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-{
-	irq_set_chip_and_handler(irq, &ath79_misc_irq_chip, handle_level_irq);
-	irq_set_chip_data(irq, d->host_data);
-	return 0;
-}
-
-static const struct irq_domain_ops misc_irq_domain_ops = {
-	.xlate = irq_domain_xlate_onecell,
-	.map = misc_map,
-};
-
-static void __init ath79_misc_intc_domain_init(
-	struct device_node *node, int irq)
-{
-	void __iomem *base = ath79_reset_base;
-	struct irq_domain *domain;
-
-	domain = irq_domain_add_legacy(node, ATH79_MISC_IRQ_COUNT,
-			ATH79_MISC_IRQ_BASE, 0, &misc_irq_domain_ops, base);
-	if (!domain)
-		panic("Failed to add MISC irqdomain");
-
-	/* Disable and clear all interrupts */
-	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
-
-	irq_set_chained_handler_and_data(irq, ath79_misc_irq_handler, domain);
-}
-
-static int __init ath79_misc_intc_of_init(
-	struct device_node *node, struct device_node *parent)
-{
-	int irq;
-
-	irq = irq_of_parse_and_map(node, 0);
-	if (!irq)
-		panic("Failed to get MISC IRQ");
-
-	ath79_misc_intc_domain_init(node, irq);
-	return 0;
-}
-
-static int __init ar7100_misc_intc_of_init(
-	struct device_node *node, struct device_node *parent)
-{
-	ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
-	return ath79_misc_intc_of_init(node, parent);
-}
-
-IRQCHIP_DECLARE(ar7100_misc_intc, "qca,ar7100-misc-intc",
-		ar7100_misc_intc_of_init);
-
-static int __init ar7240_misc_intc_of_init(
-	struct device_node *node, struct device_node *parent)
-{
-	ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
-	return ath79_misc_intc_of_init(node, parent);
-}
-
-IRQCHIP_DECLARE(ar7240_misc_intc, "qca,ar7240-misc-intc",
-		ar7240_misc_intc_of_init);
-
-static int __init ar79_cpu_intc_of_init(
-	struct device_node *node, struct device_node *parent)
-{
-	int err, i, count;
-
-	/* Fill the irq_wb_chan table */
-	count = of_count_phandle_with_args(
-		node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
-
-	for (i = 0; i < count; i++) {
-		struct of_phandle_args args;
-		u32 irq = i;
-
-		of_property_read_u32_index(
-			node, "qca,ddr-wb-channel-interrupts", i, &irq);
-		if (irq >= ARRAY_SIZE(irq_wb_chan))
-			continue;
-
-		err = of_parse_phandle_with_args(
-			node, "qca,ddr-wb-channels",
-			"#qca,ddr-wb-channel-cells",
-			i, &args);
-		if (err)
-			return err;
-
-		irq_wb_chan[irq] = args.args[0];
-		pr_info("IRQ: Set flush channel of IRQ%d to %d\n",
-			irq, args.args[0]);
-	}
-
-	return mips_cpu_irq_of_init(node, parent);
-}
-IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
-		ar79_cpu_intc_of_init);
-
 void __init arch_init_irq(void)
 {
+	unsigned irq_wb_chan2 = -1;
+	unsigned irq_wb_chan3 = -1;
+	bool misc_is_ar71xx;
+
 	if (mips_machtype == ATH79_MACH_GENERIC_OF) {
 		irqchip_init();
 		return;
@@ -355,14 +141,26 @@ void __init arch_init_irq(void)
 
 	if (soc_is_ar71xx() || soc_is_ar724x() ||
 	    soc_is_ar913x() || soc_is_ar933x()) {
-		irq_wb_chan[2] = 3;
-		irq_wb_chan[3] = 2;
+		irq_wb_chan2 = 3;
+		irq_wb_chan3 = 2;
 	} else if (soc_is_ar934x()) {
-		irq_wb_chan[3] = 2;
+		irq_wb_chan3 = 2;
 	}
 
-	mips_cpu_irq_init();
-	ath79_misc_irq_init();
+	ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3);
+
+	if (soc_is_ar71xx() || soc_is_ar913x())
+		misc_is_ar71xx = true;
+	else if (soc_is_ar724x() ||
+		 soc_is_ar933x() ||
+		 soc_is_ar934x() ||
+		 soc_is_qca955x())
+		misc_is_ar71xx = false;
+	else
+		BUG();
+	ath79_misc_irq_init(
+		ath79_reset_base + AR71XX_RESET_REG_MISC_INT_STATUS,
+		ATH79_CPU_IRQ(6), ATH79_MISC_IRQ_BASE, misc_is_ar71xx);
 
 	if (soc_is_ar934x())
 		ar934x_ip2_irq_init();

arch/mips/bmips/irq.c

@@ -15,6 +15,12 @@
 #include <asm/irq_cpu.h>
 #include <asm/time.h>
 
+static const struct of_device_id smp_intc_dt_match[] = {
+	{ .compatible = "brcm,bcm7038-l1-intc" },
+	{ .compatible = "brcm,bcm6345-l1-intc" },
+	{}
+};
+
 unsigned int get_c0_compare_int(void)
 {
 	return CP0_LEGACY_COMPARE_IRQ;
@@ -24,8 +30,8 @@ void __init arch_init_irq(void)
 {
 	struct device_node *dn;
 
-	/* Only the STB (bcm7038) controller supports SMP IRQ affinity */
-	dn = of_find_compatible_node(NULL, NULL, "brcm,bcm7038-l1-intc");
+	/* Only these controllers support SMP IRQ affinity */
+	dn = of_find_matching_node(NULL, smp_intc_dt_match);
 	if (dn)
 		of_node_put(dn);
 	else

arch/mips/include/asm/mach-ath79/ath79.h

@@ -144,4 +144,8 @@ static inline u32 ath79_reset_rr(unsigned reg)
 void ath79_device_reset_set(u32 mask);
 void ath79_device_reset_clear(u32 mask);
 
+void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
+void ath79_misc_irq_init(void __iomem *regs, int irq,
+			int irq_base, bool is_ar71xx);
+
 #endif /* __ASM_MACH_ATH79_H */

arch/mips/include/asm/smp-ops.h

@@ -44,8 +44,9 @@ static inline void plat_smp_setup(void)
 	mp_ops->smp_setup();
 }
 
-extern void gic_send_ipi_single(int cpu, unsigned int action);
-extern void gic_send_ipi_mask(const struct cpumask *mask, unsigned int action);
+extern void mips_smp_send_ipi_single(int cpu, unsigned int action);
+extern void mips_smp_send_ipi_mask(const struct cpumask *mask,
+				      unsigned int action);
 
 #else /* !CONFIG_SMP */
 

arch/mips/kernel/Makefile

@@ -52,7 +52,6 @@ obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
 obj-$(CONFIG_MIPS_CMP)		+= smp-cmp.o
 obj-$(CONFIG_MIPS_CPS)		+= smp-cps.o cps-vec.o
 obj-$(CONFIG_MIPS_CPS_NS16550)	+= cps-vec-ns16550.o
-obj-$(CONFIG_MIPS_GIC_IPI)	+= smp-gic.o
 obj-$(CONFIG_MIPS_SPRAM)	+= spram.o
 
 obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o

arch/mips/kernel/smp-cmp.c

@@ -149,8 +149,8 @@ void __init cmp_prepare_cpus(unsigned int max_cpus)
 }
 
 struct plat_smp_ops cmp_smp_ops = {
-	.send_ipi_single	= gic_send_ipi_single,
-	.send_ipi_mask		= gic_send_ipi_mask,
+	.send_ipi_single	= mips_smp_send_ipi_single,
+	.send_ipi_mask		= mips_smp_send_ipi_mask,
 	.init_secondary		= cmp_init_secondary,
 	.smp_finish		= cmp_smp_finish,
 	.boot_secondary		= cmp_boot_secondary,

arch/mips/kernel/smp-cps.c

@@ -472,8 +472,8 @@ static struct plat_smp_ops cps_smp_ops = {
 	.boot_secondary		= cps_boot_secondary,
 	.init_secondary		= cps_init_secondary,
 	.smp_finish		= cps_smp_finish,
-	.send_ipi_single	= gic_send_ipi_single,
-	.send_ipi_mask		= gic_send_ipi_mask,
+	.send_ipi_single	= mips_smp_send_ipi_single,
+	.send_ipi_mask		= mips_smp_send_ipi_mask,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_disable		= cps_cpu_disable,
 	.cpu_die		= cps_cpu_die,

arch/mips/kernel/smp-mt.c

@@ -121,7 +121,7 @@ static void vsmp_send_ipi_single(int cpu, unsigned int action)
 
 #ifdef CONFIG_MIPS_GIC
 	if (gic_present) {
-		gic_send_ipi_single(cpu, action);
+		mips_smp_send_ipi_single(cpu, action);
 		return;
 	}
 #endif

arch/mips/kernel/smp.c

@@ -33,12 +33,16 @@
 #include <linux/cpu.h>
 #include <linux/err.h>
 #include <linux/ftrace.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 
 #include <linux/atomic.h>
 #include <asm/cpu.h>
 #include <asm/processor.h>
 #include <asm/idle.h>
 #include <asm/r4k-timer.h>
+#include <asm/mips-cpc.h>
 #include <asm/mmu_context.h>
 #include <asm/time.h>
 #include <asm/setup.h>
@@ -79,6 +83,11 @@ static cpumask_t cpu_core_setup_map;
 
 cpumask_t cpu_coherent_mask;
 
+#ifdef CONFIG_GENERIC_IRQ_IPI
+static struct irq_desc *call_desc;
+static struct irq_desc *sched_desc;
+#endif
+
 static inline void set_cpu_sibling_map(int cpu)
 {
 	int i;
@@ -146,6 +155,133 @@ void register_smp_ops(struct plat_smp_ops *ops)
 	mp_ops = ops;
 }
 
+#ifdef CONFIG_GENERIC_IRQ_IPI
+void mips_smp_send_ipi_single(int cpu, unsigned int action)
+{
+	mips_smp_send_ipi_mask(cpumask_of(cpu), action);
+}
+
+void mips_smp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+{
+	unsigned long flags;
+	unsigned int core;
+	int cpu;
+
+	local_irq_save(flags);
+
+	switch (action) {
+	case SMP_CALL_FUNCTION:
+		__ipi_send_mask(call_desc, mask);
+		break;
+
+	case SMP_RESCHEDULE_YOURSELF:
+		__ipi_send_mask(sched_desc, mask);
+		break;
+
+	default:
+		BUG();
+	}
+
+	if (mips_cpc_present()) {
+		for_each_cpu(cpu, mask) {
+			core = cpu_data[cpu].core;
+
+			if (core == current_cpu_data.core)
+				continue;
+
+			while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
+				mips_cpc_lock_other(core);
+				write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
+				mips_cpc_unlock_other();
+			}
+		}
+	}
+
+	local_irq_restore(flags);
+}
+
+
+static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
+{
+	scheduler_ipi();
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
+{
+	generic_smp_call_function_interrupt();
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+	.handler	= ipi_resched_interrupt,
+	.flags		= IRQF_PERCPU,
+	.name		= "IPI resched"
+};
+
+static struct irqaction irq_call = {
+	.handler	= ipi_call_interrupt,
+	.flags		= IRQF_PERCPU,
+	.name		= "IPI call"
+};
+
+static __init void smp_ipi_init_one(unsigned int virq,
+				    struct irqaction *action)
+{
+	int ret;
+
+	irq_set_handler(virq, handle_percpu_irq);
+	ret = setup_irq(virq, action);
+	BUG_ON(ret);
+}
+
+static int __init mips_smp_ipi_init(void)
+{
+	unsigned int call_virq, sched_virq;
+	struct irq_domain *ipidomain;
+	struct device_node *node;
+
+	node = of_irq_find_parent(of_root);
+	ipidomain = irq_find_matching_host(node, DOMAIN_BUS_IPI);
+
+	/*
+	 * Some platforms have half DT setup. So if we found irq node but
+	 * didn't find an ipidomain, try to search for one that is not in the
+	 * DT.
+	 */
+	if (node && !ipidomain)
+		ipidomain = irq_find_matching_host(NULL, DOMAIN_BUS_IPI);
+
+	BUG_ON(!ipidomain);
+
+	call_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
+	BUG_ON(!call_virq);
+
+	sched_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
+	BUG_ON(!sched_virq);
+
+	if (irq_domain_is_ipi_per_cpu(ipidomain)) {
+		int cpu;
+
+		for_each_cpu(cpu, cpu_possible_mask) {
+			smp_ipi_init_one(call_virq + cpu, &irq_call);
+			smp_ipi_init_one(sched_virq + cpu, &irq_resched);
+		}
+	} else {
+		smp_ipi_init_one(call_virq, &irq_call);
+		smp_ipi_init_one(sched_virq, &irq_resched);
+	}
+
+	call_desc = irq_to_desc(call_virq);
+	sched_desc = irq_to_desc(sched_virq);
+
+	return 0;
+}
+early_initcall(mips_smp_ipi_init);
+#endif
+
 /*
  * First C code run on the secondary CPUs after being started up by
  * the master.

arch/x86/include/asm/ipi.h

@@ -57,67 +57,13 @@ static inline void __xapic_wait_icr_idle(void)
 		cpu_relax();
 }
 
-static inline void
-__default_send_IPI_shortcut(unsigned int shortcut, int vector, unsigned int dest)
-{
-	/*
-	 * Subtle. In the case of the 'never do double writes' workaround
-	 * we have to lock out interrupts to be safe.  As we don't care
-	 * of the value read we use an atomic rmw access to avoid costly
-	 * cli/sti.  Otherwise we use an even cheaper single atomic write
-	 * to the APIC.
-	 */
-	unsigned int cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	__xapic_wait_icr_idle();
-
-	/*
-	 * No need to touch the target chip field
-	 */
-	cfg = __prepare_ICR(shortcut, vector, dest);
-
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	native_apic_mem_write(APIC_ICR, cfg);
-}
+void __default_send_IPI_shortcut(unsigned int shortcut, int vector, unsigned int dest);
 
 /*
  * This is used to send an IPI with no shorthand notation (the destination is
  * specified in bits 56 to 63 of the ICR).
  */
-static inline void
- __default_send_IPI_dest_field(unsigned int mask, int vector, unsigned int dest)
-{
-	unsigned long cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	if (unlikely(vector == NMI_VECTOR))
-		safe_apic_wait_icr_idle();
-	else
-		__xapic_wait_icr_idle();
-
-	/*
-	 * prepare target chip field
-	 */
-	cfg = __prepare_ICR2(mask);
-	native_apic_mem_write(APIC_ICR2, cfg);
-
-	/*
-	 * program the ICR
-	 */
-	cfg = __prepare_ICR(0, vector, dest);
-
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	native_apic_mem_write(APIC_ICR, cfg);
-}
+void __default_send_IPI_dest_field(unsigned int mask, int vector, unsigned int dest);
 
 extern void default_send_IPI_single(int cpu, int vector);
 extern void default_send_IPI_single_phys(int cpu, int vector);

arch/x86/kernel/apic/apic_flat_64.c

@@ -53,7 +53,7 @@ void flat_init_apic_ldr(void)
 	apic_write(APIC_LDR, val);
 }
 
-static inline void _flat_send_IPI_mask(unsigned long mask, int vector)
+static void _flat_send_IPI_mask(unsigned long mask, int vector)
 {
 	unsigned long flags;